Skip to content

Bypass Barn Door Hardware

Contact Us

This product is not stocked, see lead times below. Contact us to place an order.

Price From

$1,435.00

Description

Patented in Canada and the USA, MADE IN CANADA.

The Single Track Bypass™ barn door hardware, designed by Canadian studio 1925Workbench, allows two doors to slide on one single track, thus eliminating the need for excessive hardware involved in a traditional double track bypass system.

This beautiful bypass barn door hardware is not only functional but also a real showstopper. This system is ideal for when you have a large opening but not the wall space for a large door, or the wall space on both sides of the opening to have two doors open outward. Made from quality materials such as brass and steel, this hardware is also available in various finishes. 

Please read installation instructions before purchasing, see Installation Guide for more information. The track can be customized to exact length. Please contact us for a detailed quote. 

Made and designed in Toronto by the local maker studio 1925Workbench.

Specifications

  • Pre-drilling available, please specify when ordering.
  • Bypass systems available in two variations:
    • Telescopic: both doors move together in a telescoping manner allowing access to full space. Require wall space to park the doors when opened.
    • Standard: each door moves independently in front of the opening, allowing access to half of the space at a time. This is not recommended for openings less than 60” wide.
  • To establish the track length the rule of thumb is to order at least twice the width of the door plus min 2" either side for overlap.  
  • The width of the door should be 4” wider than the opening to overlap by 2” on each side and large enough to cover any door frames or casing if applicable.
  • The track should be mounted on a backing piece to ensure the door clears any baseboards.
  • Track can be installed directly to the wall if baseboards are flush and there is adequate blocking within the wall.
  • Track over 103" shipped in 2 pieces.
  • Minimum required headroom (distance between the top of the opening and the ceiling) is 6 inches. However, 8"–10" is recommended for easier installation. 
  • Rated for doors up to 200 lbs.  Please note this is the maximum recommended weight for each pair of hangers. The actual weight bearing capacity will vary depending on how well the track is fastened to the wall.
  • The floor guide is a small bracket that is mounted on the floor at the bottom of the door to keep the door in place. You can mount the floor guide in one of two ways: (1) the slot guide or (2) the clamp guide. The floor guide is not required, but we highly recommend you install one to ensure stability. Get in touch with us if you need more information on installing floor guides.
  • Please select if you would like track to be pre-drilled or not pre-drilled if you will be drilling on site.
  • Price includes hardware only. Does not include the door or header piece.
  • These can be used outdoors but will patina more quickly than indoors.

Material(s)

Solid Brass, stainless steel, and/or heavy metal.

High quality solid brass rollers with double built-in ball bearings are used for the quiet motion.

Lead Time

3-6 week lead time. Made to Order. Please contact us for more assistance with availability. 

Product Downloads

Installation Guide
Specifications for Top Mount Hardware
Specifications for Face Mount Hardware