Available in a wide range of sizes and finishes, the Halliday + Baillie Flush Pulls are beautifully designed with concealed fixing (without exposed screw fasteners) for a pared back and sophisticated contemporary look.

Sold individually.

Combine with HB 680 push button activated edge pull for Pocket Door solutions. Find here.

Made in New Zealand.

Specifications

Suitable for timber or aluminium doors

HB 650 : great for small sliding windows and built in joinery where a consistent visual theme is required to match the HB660 or HB665 flush pull series.
L 105mm (4.1") x W 36mm (1.4") x D 14mm (0.5")

HB 660 : use this pull with the HB 680 Edge Pull for pocket doors.
L 170mm (6.7") x W 36mm (1.4") x D 14mm (0.5")

HB 660/35 : provides the same dimensions as the standard HB 660 but with a slightly shallower depth for use together with the HB 680 Edge Pull on 35mm (1⅜" ) doors.
L 170mm (6.7") x W 36mm (1.4") x D 12mm (0.4")

HB 630 : similar to the HB 660 but for privacy sliding doors with keyed locking.
L 155mm (6.1") x W 25mm (1.0") x D 75mm (3.0")

HB 665 : a longer pull pairs nicely with over height doors
L 250mm (9.8") x W 36mm (1.4") x D 14mm (0.5")

HB 668 : this asymmetrical pull is great for bi-parting or passage sliding doors.
L 250mm (9.8") x W 36mm (1.4") x D 14mm (0.5")

HB630 : this keyed lock with key/ snib on both sides matches HB 668
L 213mm (8.4") x W 25mm (1.0") x D 75mm (3.0")

HB640 : the narrow backset version of HB 630 with key/ snib both sides also matches HB 668
L 250mm (9.8") x W 36mm (1.4") x D 11mm (0.4")

HB 670 : a variant of the HB 660 but with a deeper internal depth of 16mm. It is ideal for applying the extra force you need to move large heavy sliders or when a more generous grip is preferred.
L 170mm (6.7") x W 36mm (1.4") x D 18mm (0.7")

HB 675: Designed primarily for use with bi-fold doors, this pull suits pivot doors, bi-fold doors, or cabinetry drawers. It provides an ample lip and generous internal depth for when a more substantial grip is required.
L 170mm (6.7") x W 46mm (1.8") x D 18mm (0.7")
NOTE: This flush pull is handed. Specify LH or RH
**Please contact us to order HB675

HB 677: HB 677 Flush Pull is the big brother of the HB 675. Like its counterpart, this pull would just as well suit pivot doors, bi-fold doors, or cabinetry drawers. It provides an ample lip and generous internal depth for when a more substantial grip is required.
L 250mm (9.8") x W 46mm (1.8") x D 17mm (0.67")
NOTE: This flush pull is handed. Specify LH or RH
**Please contact us to order HB677

HB 1470 : very large which work well proportionately with large sliding doors.
L 310mm (12.2") x 50mm (2.0") x 15mm (0.6")

HB 1475 : Bi-fold Flush Pull which is similar but has a deeper grip to manoeuvre the door. Great for hinge or pivot doors.
L 310mm (12.2") x 50mm (2.0") x 15mm (0.6")
NOTE: This flush pull is handed. Specify LH or RH
**Please contact us to order HB1475

HB 1575 : This super size pull is the largest at a 20-inch height. These provide an appropriately-scaled pull for taller pivot or bi-fold doors, while its increased finger grip allows sufficient leverage for easier operation of heavier doors.
L 510mm (20.0") x 70mm (2.7") x 17mm (0.7")
NOTE: This flush pull is handed. Specify LH or RH
**Please contact us to order HB1575

Glue, epoxy, silicone products etc are not required or recommended for installation.

Material(s)

Diecast zinc/ HB 1470, 1475, 1575 Solid Brass

Finishes:

SC: Satin Chrome
PC: Polished Chrome
BN: Brushed Nickel
WHT: Powder Coat White
EBA: Powder Coat Electro ™ Black Ace
EMB: Powder Coat Electro ™ Medium Bronze
EFW: Powder Coat Electro ™ Flat White

Complete Finishes List and here

Product Downloads

HB Full Catalogue

Currency

Keep In Touch

Recessed Pulls