Pre-drilling or pre-milling for hardware components is not recommended until all items are received and measured. Learn more
There may be slight variations that could affect the installation of your hardware as many pieces are hand finished / fabricated.
Casson is not responsible for any damages or inconveniences resulting from the improper installation of the hardware.
Pairs With
Description
The Multi Set (2-Gang) by Forbes & Lomax is a combination rotary dimmer and toggle switch plate, blending 1930s brass-and-nickel switch aesthetics with modern dimming capability. Each set pairs a smoothly adjustable rotary dimmer with a toggle switch on a shared plate. Toggles and dimmers can be interchanged on the plates during installation to suit specific room configurations.
The rotary dimmer manages up to 120 W of LED lighting (or 300 W incandescent/halogen). Toggle switches are available in 3-way and single-pole configurations, rated at 15 A. Standard sets ship with 3-way toggles (can be wired single-pole). 4-way toggles available on request. In 3-way or 4-way circuits, dimming is possible from one location only — remaining switches function as non-dimming toggles.
For personalized configurations, email contact@cassonhardware.com with specifications, plans, or schedules for a customized lighting solution.
Specifications
- Switch diameter: Ø 20 mm (0.79")
- Knob diameter: Ø 20 mm (0.79")
Plate Sizes
- 1-Gang: W 70 mm (2.76") × H 115 mm (4.53")
- 2-Gang: 115 mm (4.53") × 115 mm (4.53")
- 3-Gang: W 162 mm (6.38") × H 115 mm (4.53")
- 4-Gang: W 210 mm (8.27") × H 115 mm (4.53")
Electrical Ratings
- Line voltage — for conventionally wired installations
- Toggle: 3-way, 15 A (also works as single-pole)
- LED dimmer: Max 120 W LED or 300 W incandescent/halogen
Custom Quote Options
- Incandescent dimmer: Max 500 W incandescent/halogen
- 0–10 V (linear): Max 20 dimmable drivers
- Non-dimming: Max 720 W any load type (on/off only)
Important Notes
- TRIAC dimmer is compatible with LED and incandescent
- Toggle switches conform to UL 20 and are certified to CSA C22.2 No.111
- Toggle switches install into standard junction boxes; boxes must be recessed below the finished wall surface by at least 1/8"
- Rotary dimmers conform to UL 1472 and are certified to CSA C22.2 No.184
- LED dimmers are forward-phase TRIAC dimmers
- Review and ensure all certifications are applicable for local code
- Send full lighting specs to the sales team for compatibility review if unsure
- Must be installed by a licensed electrician
Application: Light-duty commercial, residential.
Materials
Available Finishes
- Unlacquered Polished Brass
- Aged Brass
- Nickel Silver
- Brushed Stainless Steel
- Antique Bronze
- Lacquered Brushed Brass
Unlacquered Polished Brass and Aged Brass are living finishes that change colour over time. Lacquered Brushed Brass is a non-living finish and will not change colour. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid chemical or alcohol-based cleaners. Refer to the care guide below.
Finish Samples
