Mineral Metal Appliance Bar Pull

Chapman & Bose

SKU: M-BP-M-2S-BRSS-SAT-12

$185.00

Shipping calculated at checkout.

Quantity

Pre-drilling or pre-milling for hardware components is not recommended until all items are received and measured. Learn more

There may be slight variations that could affect the installation of your hardware as many pieces are hand finished / fabricated.

Casson is not responsible for any damages or inconveniences resulting from the improper installation of the hardware.

The Mineral Metal Appliance Pull by Chapman & Bose is a solid brass and stainless steel bar pull designed for integrated refrigerators, dishwasher panels, tall pantry doors, and other large appliance applications. Its elongated, softly rounded profile delivers a minimalist aesthetic with confident presence.

Available in two diameters — 5/8" and 1" — and lengths from 12" to 36". Choose between two-standoff and three-standoff configurations depending on application.

Explore the full Chapman & Bose collection here.

Configuration	Best For
2 Standoffs	Most appliance and door installations up to 24"
3 Standoffs	Pulls over 24", integrated fridges, Sub-Zero panels

Standoff count is application-based rather than determined by panel size or weight. Two standoffs suit the majority of installations. For pulls over 24" in the 1" diameter — particularly on built-in refrigerator panels that are more resistant to open, such as Sub-Zero integrated fridges — three standoffs may be recommended. In the 1-1/4" diameter, two standoffs are sufficient for all lengths; a third is an aesthetic choice.

1" Diameter (25.4 mm) — Projection: 51 mm (2"):

18": 457 mm L × 25.4 mm D
24": 610 mm L × 25.4 mm D
30": 762 mm L × 25.4 mm D
36": 914 mm L × 25.4 mm D

5/8" Diameter (15.88 mm) — Projection: 37 mm (1.46"):

12": 305 mm L × 15.88 mm D
18": 457 mm L × 15.88 mm D
24": 610 mm L × 15.88 mm D
30": 762 mm L × 15.88 mm D
36": 914 mm L × 15.88 mm D

1" Diameter (25.4 mm) — Projection: 51 mm (2"):

24": 610 mm L × 25.4 mm D
30": 762 mm L × 25.4 mm D
36": 914 mm L × 25.4 mm D

5/8" Diameter (15.88 mm) — Projection: 37 mm (1.46"):

24": 610 mm L × 15.88 mm D
30": 762 mm L × 15.88 mm D
36": 914 mm L × 15.88 mm D

Solid brass and stainless steel throughout.

Finishes

Satin Brass
Polished Brass
Unlacquered Raw Brass
Weathered Brass
Blackened Brass
Polished Stainless Steel
Brushed Stainless Steel

Mineral Bar Pull Product Sheet (PDF)

Pairs With

Chapman & Bose

Materials meant to evolve.

Chapman & Bose produces hardware with a focus on material behavior over time. Each piece is cut, stitched, or machined by hand in a workshop in Toronto, Canada, using materials selected for durability and use.

The collection works in vegetable-tanned leather, solid brass, and stainless steel. Leather is stitched where the construction requires it, with the seam integrated into the form. Metal components are made from solid stock, unlacquered, with a softened but evident finish. No plating or surface sealing is applied.

These materials change with use. Leather deepens in tone at points of contact. Brass and bronze develop patina. Stainless steel refines where handled. The surface at installation is not fixed, but an initial state that evolves with time and interaction.

Finish Samples

Principles

Chosen to Wear: Vegetable-tanned leather, solid brass, bronze, stainless steel. Selected for how they age and respond to use, not how they appear at installation.
Stitched by Hand: Leather is saddle stitched where structure requires it. The seam is left visible and becomes part of the form rather than being concealed.
Patina as Record: Surfaces shift over time. Leather darkens and softens at contact points. Brass and bronze develop patina. Stainless steel refines where it is handled. The installed condition is an initial state, not a fixed finish.
Studio Made: Each piece is cut, stitched, turned, or machined by hand after order. Lead times reflect fabrication time, not stock availability.