Bypass Barn Door Hardware TELESCOPIC

Patented in Canada and the USA, MADE IN CANADA.

The Single Track Bypass™ barn door hardware, designed by Canadian studio 1925Workbench, allows two doors to slide on one single track, thus eliminating the need for excessive hardware involved in a traditional double track bypass system.

This beautiful bypass barn door hardware is not only functional but also a real showstopper. This system is ideal for when you have a large opening but not the wall space for a large door, or the wall space on both sides of the opening to have two doors open outward. Made from quality materials such as brass and steel, this hardware is also available in various finishes.

Please read installation instructions before purchasing, see Installation Guide for more information.

The track can be customized to exact length. Please contact us and answer the below questions for a detailed quote:
Style: Top Mount/ Face Mount/ Bi-Part
Finish: Brass/ Raw Steel/ Stainless Steel/ Black
Length:
Pre drilled or Not drilled:

Made and designed in Toronto by the local maker studio 1925Workbench.

Bypass System

• Bypass systems available in two variations:

1. Telescopic: both doors move together in a telescoping manner allowing access to full space. Require wall space to park the doors when opened.
2. Standard: each door moves independently in front of the opening, allowing access to half of the space at a time. This is not recommended for openings less than 60” wide.

Pre-Drilled vs. Non Pre-Drilled Holes

• Pre-drilling available, please specify when ordering. Please select if the track should be pre-drilled, or not pre-drilled. If you will be drilling on site, select not pre-drilled.
• Pre-drilled is 14.75” – 17.25” spaced evenly along the track.
  
• Pre-drilled tracks must be mounted on a backing piece to ensure the door clears baseboards or moldings.
• Not pre-drilled tracks require drilling on site and can be installed directly to the wall if baseboards are flush and there is adequate blocking within the wall.

Track Length & Measuring

• To establish the track length: order at least twice the width of the door plus min 2" either side for overlap.
  
• The width of the door should be 4" wider than the opening to overlap by 2" on each side. The door should be large enough to cover any door frames or casing if applicable.
• Track over 93" are shipped in 2 pieces.
  
• Recommended headroom (distance between the top of the opening and the ceiling) is 8"-10". Minimum required headroom is 6".

Weight Capacity

• Rated for doors up to 200 lbs. Please note, this is the maximum recommended weight for each pair of hangers. The actual weight bearing capacity will vary depending on how the track has been fastened to the wall.

Custom Finishes

• For custom powder coating option, a small hole (5/16" diameter) will be drilled at either end of the track for fabrication techniques. This hole is applicable to all "Drilled" or "Non-Drilled" orders. For the Single Track Bypass, these holes are 1" from the end. For other hardware, the holes are 1.5" from the end.

Solid Brass, stainless steel, and/or heavy metal.

High quality solid brass rollers with double built-in ball bearings are used for the quiet motion.

Installation Guide
Specifications for Top Mount Hardware
Specifications for Face Mount Hardware