Qtoo Single Hole Sensor Tap System
Description
The Qtoo Sink-Mounted Sensor Tap by d line is a touchless, sink-mounted tap system in marine-grade stainless steel. Its fixed spout and smooth cylindrical form suit both residential and commercial environments requiring high hygiene standards and long-term durability. Pairs with the included Qtoo Flexbox (QSF01), which houses all electronic components for simplified installation and servicing.
Designed in collaboration with Hans Thyge & Co. NSF/ANSI 61-compliant, lead-free, and built to withstand commercial use and aggressive cleaning conditions. Made in Europe. Professional installation recommended for both residential and commercial use.
What's Included
- Sink-Mounted Sensor Tap — Ø43 mm top-mount tap with IR sensor and fixed spout
- QSF01 — Flexbox sensor control module with temperature control
Optional Components
- QSP03 — Flexbox Power Hook-Up: Plug-in power supply for the Flexbox. Recommended for commercial or high-traffic installations where battery replacement would be frequent.
Specifications
- Dimensions: Ø43 mm × H 145 mm × Projection 130 mm
- Height to Aerator: 70 mm (2.7")
- Spout: Fixed with built-in aerator
- Sensor Detection Range: 50–250 mm
- Flow Rate: Max. 1.3 gpm (5.0 L/min)
- Comfort Timeout: 2 seconds
- Security Timeout: 30 seconds
- Battery: 6 × AA — approx. 8.4 years at 20 activations/day; approx. 4.6 years at 150 activations/day
- Low Battery Warning: 1 blink every 5 seconds (10-day advance notice)
- Empty Battery Behaviour: 1 blink every 5 seconds, then shuts off
- Automatic Rinse: Deactivated by default
- Max Working Pressure: 8 bar
- Certification: NSF/ANSI 61, CSA B125.1 (2018), ASME compliant, leakage-tested to 15 bar
- Warranty: 10-year mechanical | 5-year PVD finish
- Lead-free compliant
Materials
Marine-grade stainless steel (AISI 316) throughout. Lead-free and antibacterial.
Finishes
- Polished Stainless Steel
- Satin Stainless Steel
- PVD Satin Brass
- PVD Polished Brass
- PVD Satin Black
- Matte Black
Finish Swatches & Samples
Installation Notes
Pre-drilling or pre-milling for hardware components is not recommended until all items are received and measured.
There may be slight variations that could affect the installation of your hardware as many pieces are hand finished / fabricated.