

Painted Range Rotary Dimmers by Forbes & Lomax
Description
The Painted Range by Forbes & Lomax provides primed, ready-to-paint plates that sit flush to the wall. Each plate can be painted onsite to match the wall colour for a subtle, unobtrusive look, while the switch mechanism is supplied in the finish of your choice.
Painted rotary dimmers push to switch on/off and rotate to dim and brighten, based on the elegant nickel and brass switches of the 1930s. Can be mixed with Toggle Switches and push buttons on the same plate. 1–4 gang configurations.
Established in 1987, Forbes & Lomax is a UK-based heritage electrical brand recognized by architects and designers for refined switch and outlet design.
Specifications
- Knob: Ø 20 mm (0.79")
Plate Sizes
- 1 Gang: W 70 mm (2.76") x H 115 mm (4.53")
- 2 Gang: 115 mm (4.53") x 115 mm (4.53")
- 3 Gang: W 162 mm (6.38") x 115 mm (4.53")
- 4 Gang: W 210 mm (8.27") x 115 mm (4.53")
Available Configurations
- LED: Max. 120 W LED or 300 W Incandescent/Halogen (TRIAC)
- 0-10 V (Linear): contact us
- Non-Dimming: contact us
Installation Notes
- Rotary dimmers conform to UL 1472 and are certified to CSA C22.2 No. 184
- Supplied as 3-way (can also be used as single pole). Only one dimmer per 3-way or 4-way circuit — other positions require toggle switches
- Must be installed by a licensed electrician
- Junction boxes must be recessed below the finished wall surface by at least 1/8"
For compatibility with higher wattage lights, transformer/driver-based fixtures, or non-replaceable LEDs, email lighting specifications before purchase. Areas of application: light-duty commercial, residential.
Materials
Available Switch Finishes
- Unlacquered Polished Brass
- Antique Bronze
- Brushed Stainless Steel
- Nickel Silver
- Matte Brass
- Lacquered Brushed Brass
Unlacquered Polished Brass is a living finish that changes colour over time. Lacquered Brushed Brass is a non-living finish and will not change colour. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid chemical or alcohol-based cleaners.
Installation Notes
Pre-drilling or pre-milling for hardware components is not recommended until all items are received and measured.
There may be slight variations that could affect the installation of your hardware as many pieces are hand finished / fabricated.