Bocci 22: Flush Outlet System

Select your mounting surface, device configuration, and outlet type. Your setup will determine the required components to complete your set — accessories can be added as needed.


Final price is shown below once all components are selected.



This quantity reflects the number of complete sets being added to your cart.

Original price$0.00
/
Shipping calculated at checkout.
  • Estimated Ship Date: 1-2 weeks

The Bocci 22 System is a modular flush-mounted solution for power and data that sits cleanly within your surface, eliminating visible cover plates for a completely seamless look. Designed with precision and minimalism in mind, each component locks into a cylindrical mounting plate that installs directly into drywall, tile, wood, or other finish materials.

This product listing supports all installation types. The configurator below will walk you through selecting the correct combination of components for your specific surface, layout, and device needs.

The system is built around standard components, but every project is different. Here’s what you’ll choose during configuration:

1. Mounting Surface
Choose the material you're installing into:
Drywall / Wood / MDF / Corian / Stone / Tile / Plaster

2. Device Configuration
Select whether you're installing a single device or a double device (two components side by side).

3. Device Orientation
For double-device configurations, choose the layout:
Side-by-side narrow / Wide / Diagonal


4. Mounting Surface Thickness
(For multi-material surfaces only. Not required for drywall.)
Select the depth range that reflects the total thickness of your surface, including any adhesive or substrate layers. This ensures the component sits flush.

6.35mm – 12.7mm (0.25" – 0.5")
Short

  • For total material depths up to 12.7mm (0.5")
  • Mounting plate must be set 12.7mm behind the finished surface
  • Best for thin tile, painted MDF, or minimal build-up

12.7mm – 19.05mm (0.5" – 0.75")
Medium

  • For total depths up to 19.05mm (0.75")
  • Mounting plate must be set 19.05mm behind the finished surface
  • Common for standard tile with adhesive or layered surfaces

19.05mm – 31.75mm (0.75" – 1.25")
Long

  • For total depths up to 31.75mm (1.25")
  • Mounting plate must be set 31.75mm behind the finished surface
  • Choose this if working with thick cladding, stone, or dense backing

Tip: Measure from the face of your finish to the back of your substrate. If in doubt, round up to the next size. Still not sure? Check the Barrel Depth Selection Guide (PDF) or email contact@cassonhardware.com.


5. Faceplate Colour
Options include: White / Almond / Grey / Black

6. Device Type
Select the component that meets your needs. All components are flush-mounted and compatible with standard Bocci 22 faceplates.

  • Outlets
    • 15A Standard Outlet (120V)
    • 20A High Amperage Outlet (120V)
  • USB / Media
    • USB-A
    • USB-C
    • HDMI
  • Data & Control (Request Quote)
    • RJ45 CAT6A (Data)
    • RJ12 (Telephone)
    • F Connector (Coaxial Cable)
    • Keypad Control (Smart Home Integration)
General Information


Certification


Installation Instructions


Planning Guides


Technical Drawings


Component Data Sheets

Mounting Plates: Drywall

Mounting Plates: MDF / Wood / Stone / Tile / Corian

Devices: Standard

Devices: Request Quote


Tools & Accessories

Multi-Material Install
Step-by-step guide for tile, plaster, Corian, or other mixed surfaces.

Drywall Install
Clean installation into drywall using standard Bocci 22 components.

Shop finish samples HERE.


This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

This is a precise architectural product, and support is available. If you're unsure what to order, use the form above or email contact@cassonhardware.com — our team is happy to help.