Invisible Plate Toggle Switches by Forbes & Lomax

The Invisible Toggle Switch, crafted in transparent acrylic by Forbes & Lomax, a heritage electric brand, is available in various gang configurations and finishes. These Toggle Switches are rated at 15 amps, with 3-way and 4-way versions. Note that the 3-way switches can also be used as single pole switches.

Designed to complement these switches seamlessly, The Invisible finish is ideal for wallpaper but can also be used with stone or tiles. The package includes two wall plates: a clear lucite top plate and a white metal backplate, which will require faux painting to match stone installations.

Toggle Switches can be mixed with Rotary Dimmers and push buttons on the same plate, allowing you to customize your electrical configuration. For specific configurations or inquiries, please contact us. Elevate your electrical switches with The Invisible Toggle Switch by Forbes & Lomax. Refer to the Product Downloads for installation guidance.

Established in 1987, Forbes & Lomax is a UK based company with a reputation for high quality design amongst architects and designers.

Switch: Ø 20 mm (0.79”)

1 Gang Plate: W 70 mm (2.76”) X H 115 mm (4.53”)
2 Gang Plate: 115 mm (4.53”) X 115 mm (4.53”)
3 Gang Plate: W 162 mm (6.38”) X 115 mm (4.53”)
4 Gang Plate: W 210mm (8.27”) X 115 mm (4.53”)

Available for:

Line Voltage (For use in conventionally wired installations)

• 3-way, 15A (also works as Single-Pole)
• 4-way, 15A (contact us)

Low Voltage: For use on Class 2 Circuits only

• 2-Position Momentary Dry Contact Toggle (contact us)
• 3-Position Momentary Dry Contact Toggle (contact us)
• 3-Position Latching Dry Contact Toggle (contact us)

See full Technical Specification sheets below.

Important Notes:

• Toggle switches conform to UL 20 and are certified to CSA C22.2 No.111.
• Please review and ensure all certifications are applicable for your local code.
• If unsure, please send our Sales Team full SPECS of lighting for a compatibility review.
• Must be installed by a licensed electrician.
• Toggle Switches install into standard junction boxes but the boxes must be recessed below the finished wall surface by at least 1/8". Please refer to the Wallbox Assemble Diagram in the Installation Guide below. If you are installing into existing junction boxes, you will probably find the boxes are already recessed by at least this much but please check to make sure before placing an order.

Areas of application: Light-duty Commercial, Residential

Acrylic Plate

• Switches are available in Unlacquered Brass, Nickel Silver, Brushed Stainless Steel and Antique Bronze

Unlacquered Brass has a high-shine, polished look and is a living finish that changes colour over time.

Note: materials will slowly age or oxidize over time. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid use of chemical or alcohol based cleaners. Refer to the care guide below for best practices.

Toggle Switch Product Sheet
Toggle Switch Installation Guide
Invisible Toggle Switch Installation Notes
Toggle Switch Junction Box Assembly
Forbes and Lomax Brochure
Forbes and Lomax Care Guide